Lets get geeky…
A good argument against zip ties was very well documented by a friend of mine, Steve Lampen at Belden. It gets down to the fact that, as with any wire, you have a transmission medium. Much like coax and open line, you need to have a constant impedance through out the length of the line, else your signal will not arrive on the other end the way you may want due to mis-matches in the impedance of the wire causing standing waves.
What determines the impedance of a transmission line is the dielectric (the material between the conductors, the diameter of the conductors and the distance from each other. Zip ties typically will change that with the amount of pressure that is used for installation of the ties.
Additionally, you have to be careful in how you tie your cables together. Everyone wants a neat looking installation and will likely have a nice even spacing between ties. With the change in the characteristic impedance of the ties and spacing them out evenly, you get a really big notch in the frequency response of the line that is based on the distance of the ties. It is actually better to randomly space the ties.
Cable lacing with flat waxed string is one of the better ways to tie down cable. It provides for less pressure on the cable and is also less of an obstruction when you have to work with adding more or moving cable around the area that you have previously tied down. Many colos and Central Offices (CO) I have worked with have banned wire ties for these reasons.
A great alternative to lacing is VELCRO or hook and loop fabric straps. Velcro has the advantage that it can be quickly moved around and doesn’t bind or change the cable specification. Typically it is used to bind a bunch of cables together. You may still need to use lacing to tie that bundle down to a wire tray. RIPTIE was one of the first companies to sell VELCRO for cable bundling. They have nice individual ties but they are expensive. If you don’t mind not having a fancy tag on your ties, then just get a roll of VELCO from pretty much any dealer. Wrap the cable and cut as needed. You can even get different colors to identify different bundles. Such as using the resistor color code to indicated bundle numbers. At my last company, we would use one color for core cables and another color for customer facing cabling.
And again, check out Steve’s report.